Why you should NEVER use bleach on its own when tackling mould this winter – plus the 90p hack you must try instead

AS we enter the colder seasons, homes often become a trap for damp, mould, and condensation. 

This is primarily due to poor ventilation, particularly for those attempting to save on their energy bills by not using their heating.

And this can be difficult to keep on top of, especially with the rise in energy bills and cost of living crisis. 

But one place that can be really tricky to keep on top of when it comes to mould and damp is the bathroom. 

The bathroom is a haven for mould due to the high levels of moisture and humidity that are typically present.

And activities such as showering and bathing generate steam, and can condense on surfaces like walls, ceilings, and tiles. 

However, bathroom experts at have revealed a few savvy hacks on how to remove mould in the bathroom and some may surprise you. 

Commercial Director Colm Lalor says: “Keeping grout clean can be a constant battle, plus tiles are prone to the build-up of mould, and both these can quickly make your bathroom walls or floor unsightly.

“The easiest way to remove mould is by dipping an old toothbrush in a solution of one-part bleach to four-parts of water, and then - using a bit of elbow grease - scrub the mould away and rinse with water. 

“Be careful not to scrub too hard, or you may damage the grout.

“To remove mould from walls and surfaces without tiles, use the same solution and gently scrub using a damp cloth until the mould is gone, then dry the area well with a dry, soft cloth.

“We would recommend avoiding the use of bleach on any brassware and only use on white goods such as toilets.”

We previously revealed some other hacks to tackling mould in the house. 

Nancy Emery, from , explained that for those looking to battle mould without turning their heating on, then start by opening your windows for a start.

Nancy explained: “It may seem counterproductive to open your windows in cold or wet weather, but it is essential to stop mould growth. 

“Cracking open windows a couple of times a day, especially after showering, bathing or cooking, is one of the easiest and most cost-effective ways to help moisture escape.

“Mould thrives in warm and wet environments. 

“So, it is especially important to increase ventilation in the colder months, when prolonged time spent indoors can result in heat building up from our central heating, bodies and breath.”