I’m a paving expert and here is why you should NEVER use a jet washer to clean your patio
WITH many of our summer blooms beginning to die back now is the perfect time to turn our attention to our paving.
And while clearing any moss or grime from our slabs may seem simple enough, Steven Bell, the Managing Director of Paving Shopper, brings to light some crucial insights.
Bell highlights several common cleaning practices that could inadvertently damage your paving stones including why you should avoid pressure washers…
Caution with Pressure Washers
While pressure washers can be effective, Bell advises caution.
Incorrect use can cause significant damage to paving stones. He explains that while most paving stones are robust, excessive pressure or frequent use can lead to surface imperfections like pitting and cracks.
Bell recommends keeping the nozzle at least a foot away from the paving and avoiding the highest pressure settings to prevent damage.
Read More on Home Hacks
Avoid Strong Acids
Bell warns against using strong acids for cleaning, as they can deteriorate natural paving stones over time.
This can lead to cracking, discolouration, and difficult-to-remove stains. Instead, he suggests using milder acids like lemon juice or vinegar diluted in water, which can effectively remove stains without harming the stone.
Use Soft Bristle Brushes
The choice of brush is crucial in cleaning paving stones. Bell advises against hard, stiff-bristled, or wire brushes, as they can damage the surface of the stones.
He recommends using softer bristled brushes to avoid scraping and harming the natural stone.
Avoid Salts During Winter
Using salts in winter might seem beneficial for deicing, but Bell cautions that salts can be erosive, leading to surface deterioration and cracks in paving stones.
How to repair broken patio slabs
THE paving specialists at Simply Paving told Fabulous how you can repair broken patio slabs, without the faff.
The experts advised: “If you have a loose paving slab, then it’s unlikely it can be lifted straight by hand. Instead, you will probably need a hammer and chisel to prise the paver free of your patio.
“To remove loose paving slabs without damaging your flagstones, carefully chip away at the mortar around the paving slab with the plugging chisel and rubber mallet until the slab comes completely loose.
“Then, slide the spade into the gap left by the mortar and prise the paver free of the patio.
"As you lift it up, place a short piece of timber underneath the spade to act as a lever, making it easier for you while protecting the slab underneath.
“When the paver starts to give, place the cylindrical wood underneath it and roll the slab out of the patio.”
He suggests using sand or salt-free deicing substances as gentler alternatives that provide grip without damaging the stone.
Bell's insights emphasise the importance of using the right tools and substances to maintain the beauty and longevity of your patio paving.
He stresses that while some methods might seem effective, they can cause long-term damage, underscoring the need for careful and informed maintenance practices.